Seriously, mainsprings are nothing to fool with. As mentioned previously, treat mainsprings with respect and caution.Īlways wear safety glasses and gloves.
Once the movement is put back together, make sure it is wound up all the way and cut the tie wire. These mainsprings come wound up with a tie wire around it. Please email us for more information on this topic. Naturally, if this happens then a restoration needs to happen. Also, it is possible for mainsprings to cause damage to the gears in the movement. Above all, mainsprings can be very dangerous when they snap. In fact, that would need a woodworker to fix. Of course, this is not a common occurrence, but it can happen. In extreme cases, the mainspring will damage the clock case. On the other hand, if it is a hole end mainspring it will usually stay within the barrel. When the spring breaks, it can protrude a great deal outside of the movement. This is how a spring reacts when it breaks. Naturally, the spring is broken when it winds for a bit and then snaps back.Ĭertainly, it could be wound forever and it will not stay in a coil. Use the clock key to wind the mainspring. Of course, our experienced clockmakers are happy to help.
#PARTS GEEK CLOCK SPRINMG FREE#
Should you need assistance please feel free to email us questions. Specifically follow the directions to match up your spring to a new one. So, hole end mainsprings can be found on the hole end mainspring page. Hence, a mainspring that cannot be seen is a hole end mainspring. Likewise, if the spring is in a barrel, the mainspring can't be seen. In other words, this is the type of mainspring that can be seen. This loop wraps around the outer plate pillar of the movement. The Loop-End clock mainspring description consists of a long flat spring with a loop on one end.
0 kommentar(er)
